These are all genuine CTEK branded products. We have no affiliation with Maybach OEM Products.
The Maybach pack contains the following items:
- CTEK MXS 10 Battery Charger
- CTEK 56-304 2.5m Comfort Extension Lead
- CTEK 40-059 Protective Rubber Bumper
- Magcode Powerclip
CTEK MXS 10 General Information - 2 Year Warranty
- Latest 2023 model
- Supplied with a UK 3 pin plug
- Comfort Connect compatible: Yes*.
- Input voltage: 220-240VAC, 50-60Hz
- Output voltage: 14.4V, 14.7V, RECOND 15.8V, SUPPLY 13.6V
- Charging current: 10A
- Ripple: <4%
- Ambient Temperature: -20 deg.C to +50 deg.C, output power is reduced automatically at higher temperatures.
- Charger Type: Eight step, fully automatic charging cycle
- Batteries: 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL)
- Battery size: 20 - 200Ah
- Dimensions (L x W x H): 197x93x49mm
- Insulation: IP65
- Weight: 0.8kg
- Quick coupling - Yes
* Excludes accessories with a rated current below 10 amps.
The MXS 10 is a charger that offers state of the art technology. It is ideal for professional use and excellent in workshops, caravans, motorhomess, boats or cars. The MXS 10 is perfect for solving a broad range of battery problems. It offers features such as battery diagnosis which shows if a battery can receive and retain a charge, a special reconditioning function which restores stratified and deeply discharged batteries, unique maintenance charging and a temperature sensor for optimised charging regardless of the weather conditions. It also has a power supply mode which allows the battery to be disconnected from the vehicle without losing important configurations. The unique display allows the user to follow the entire charging process.
The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20-200Ah. The charger is IP 65 rated (splash and dust proof), designed to protect vehicle electronics, non-sparking, reverse polarity protected and short-circuit proof. It is delivered with a 2-year warranty.
CTEK 56-304 General Information
- Cable length: 2.5 metres.
- Suitable for Ctek Chargers with Comfort Connect Plugs.
- 2-year warranty.
The 56-304 is an extension lead for any CTEK charger with a Comfort Connect compatible plug (black and orange connector). It will extend the low voltage side of the charger by 2.5 metres, allowing you to leave the unit inside your home or garage and run the lead to your vehicle.
CTEK 40-059 General Information
- Protective silicon rubber bumper
- Suitable for use with 10 amp chargers including:
- MXS 10
CTEK have developed a rubber frame to suit their range of consumer chargers. Made from durable silicone, it gives a soft tight sleeve around the charger, preventing scratches and bumps on the charger case and damage to sensitive surfaces. It also gives a good grip wherever it is placed, preventing the charger falling and sustaining damage.
Magcode Powerclip 12v General Information
As used by Bentley, Rolls Royce and Maybach.
MagCode Power Systems are revolutionary power outlet systems for 12V DC
circuits. Unlike conventionalconnectors, MagCode Power Systems utilise magnetically
coded flat contacts, delivering safe power across modularcomponents far superior to
the ubiquitous cigarette lighter sockets. Other metal objects or permanent magnets
cannot energise the contacts at any time, making the outlet completely safe and
MagCode Power Systems are dust and water resistant, easy to clean and
suitable for straightforward retrofitting a vast range of applications. Their
advanced technology and superior design makes MagCode Power Systems
the ideal exterior connector on vehicles under conditions of sustained charging
and high current load.